FR

Models for riders who love carving, but avoid hardboots.

To produce these models, we used all our experience from building slalom race boards for World Cup and Europe Cup athletes. These are carving snowboards. Intended to be used with regular soft bindings and regular non-plastic boots. Small rocker on the nose and tail of the board makes it easier to initiate the turn.

Radii and type of sidecut are individual for each model size. Some have regular circular sidecut and some have elliptical sidecut. All models have high torsional stiffness, which is very important for carving turns. It is basically what differentiates these boards from other brands. Due to high torsional stiffness these models have perfect stability at high speed and carved turns including changing radius carving turn.

Stiffness started ranges from XS and up to finished H+.

Our factory is focused on producing race models, thus we only have worldcup-level base material. So, we used the same world-cup-level base material for these models as well. Even for the ones with fiberglass construction.

Fiberglass construction is our budget-friendly version.

Kevlar construction provides much more power and stiffness.

Features:

— built for soft boots carving

— sandwich construction

— whole woodcore (poplar/ beech )

— 9mm ABS sidewall

— nose & tail wrapped edge

— 4x4 or 5x2 block of inserts (no choice)

— small rocker on the nose and tail

— professional racing sliding base

— rubber layer under the edge that allows for reduced vibration

—one of the designs from our design library

→ SHOP

Lenght	Radius	Contact	Nose	Waist	Tail	Setback	Stance
145 FR	6.8 m	121.5 cm	29.2 cm	23.9 cm	29.2 cm	3 cm	45-53 cm
150 FR	7.1 m	126 cm	29.8 cm	24.3 cm	29.8 cm	3 cm	46-54 cm
155 FR	8.4 m	128.5 cm	29.3 cm	24.6 cm	29.3 cm	3 cm	50-58 cm
157 FR Wide	11.7 m	133 cm	31.8 cm	27.2 cm	30 cm	4 cm	50-58 cm
159 FR	10 m	134 cm	30.9 cm	26.0 cm	29.9 cm	3 cm	50-58 cm
162 FR	9-14 m	137 cm	28.4 cm	24.5 cm	27.8 cm	4 cm	50-58 cm
162 FR Wide	9-14 m	137 cm	32.0 cm	28.1 cm	31.4 cm	3 cm	50-58 cm
165 FR	10-15 m	140 cm	28.4 cm	24.5 cm	27.8 cm	3 cm	50-58 cm
165 FR Wide	10-15 m	140 cm	32.0 cm	28.1 cm	31.4 cm	3 cm	51-59 cm

Fiberglass

Specially selected types of wood provide riders with good rebound and comfort. For each model we use a combination of several types of fabric to adjust longitudinal and torsional stiffness.

This construction is available for all FR boards.

580 €